Rebar calculator

Units
Reinforcement
ft
ft
Bar size

#4 bar is 0.5 in across and weighs 0.668 lb per foot (ASTM A615).

The same both ways. Use the spacing on your drawings; 18 in is only a starting point.

in

Concrete between the bar ends and the slab edge: 3 in where it is cast against earth (ACI 318).

in
Stock bar length

Common US stock lengths (Nucor). Metric suppliers may stock other lengths, so check yours.

40 diameters is a common rule of thumb, not code. Your engineer's drawings govern.

bar diameters

For offcuts and cutting waste.

%

Rebar to buy

31 bars of 20 ft

14 bars one way and 14 the other: 546 ft of #4 bar with laps, about 364.73 lb. The order adds 10% extra.

Rebar to buy. 31 bars of 20 ft. 14 bars one way and 14 the other: 546 ft of #4 bar with laps, about 364.73 lb. The order adds 10% extra.

What to buy
Bars running the length14 at 19.5 ft
Bars running the width14 at 19.5 ft
Lap length20 in (40 bar diameters)
Lap splices0
Total bar length with laps546 ft
Steel weight364.73 lb
Stock bars to buy31 bars of 20 ft

For estimating materials only. The engineer's drawings and your local building code govern bar size, spacing, cover and laps.

Free calculator by PureCalc. Open the full calculator