How much concrete for a 50 × 50 ft slab, 6 inches thick?
A 50 × 50 ft slab covers 2,500 square feet. At 6 inches thick it holds 46.3 cubic yards (1,250 cubic feet) of concrete. With 10% extra for spills and uneven ground, order 50.93 cubic yards.
Concrete to order
50.93 yd³
46.3 yd³ for the shape, plus 10% extra.
Concrete to order. 50.93 yd³. 46.3 yd³ for the shape, plus 10% extra.
| Cubic yards | 50.93 |
|---|---|
| Cubic feet | 1,375 |
| 80 lb bags | 2,292 |
| 60 lb bags | 3,056 |
| 40 lb bags | 4,584 |
| Ready-mix truckloads | 5 to 7 |
What this slab needs
This is a ready-mix job: 5 to 7 truckloads at 8 to 12 cubic yards each. The same pour from bags would mean 2,292 bags of 80 lb mix, about 91.7 tons.
At 4 inches instead of 6, the same slab would need 33.95 cubic yards with the extra, 33% less.
By bag size: 2,292 × 80 lb, 3,056 × 60 lb or 4,584 × 40 lb. An 80 lb bag of concrete mix makes about 0.60 cubic feet.
How it's calculated
A slab or footing is a box: length × width × thickness. A round column is π × radius² × height. Solid steps on the ground are stacked blocks: the bottom step is one block tall, the next two, and so on, so n steps hold n × (n + 1) ÷ 2 blocks of width × rise × run.
Volumes are worked out in cubic feet and converted exactly: 27 cubic feet make a cubic yard, and a foot is 0.3048 m.
Bags are rounded up to whole bags of the order volume. An 80 lb bag of concrete mix makes about 0.60 cubic feet, a 60 lb bag 0.45 and a 40 lb bag 0.30.
Ready-mix trucks carry 8 to 12 cubic yards, so the truckload count is a range. Most suppliers also have a minimum order, so check before ordering a small amount.
Sources
- QUIKRETE Concrete Mix No. 1101 product data sheet, Quikrete International (2022-10)
- Sakrete High-Strength Concrete Mix technical data sheet, Sakrete (Oldcastle APG) (2023)
- CIP 31: Ordering Ready Mixed Concrete, National Ready Mixed Concrete Association (2023)
- PCC Truck Mixer (citing AASHTO), Pavement Interactive (2026)
- NIST Handbook 44, Appendix C: General Tables of Units of Measurement, National Institute of Standards and Technology (2026)
Last reviewed October 2026.